Process control, stable product characteristics and improved energy efficiency: Piovan's long-standing aims have now also been achieved in PET treatment thanks to its Automatic Injection Pressure Control (AIPC) Technology.
Automatic control of injection pressure: this is the meaning of AIPC, the new Piovan patent-pending technology which enables the injection moulding machine to "guide" the Genesys drying system so that it operates with a constant injection pressure around a customer-defined set point.
In a conventional PET preform production system, the resin drying phase is not connected to injection and preform production: therefore, the pressure does not always fall within a predetermined range of values which could ensure a constant product quality throughout the cycle. On the contrary, the pressure fluctuates continually, causing possible variations in the characteristics of the PET products.
Injection pressure is a fundamental process parameter, because it is directly dependent on the amount of water left in the PET after the drying process. Keeping it constant ensures that the preforms produced always have the desired properties and physical characteristics.
Prior to the introduction of automatic pressure control, Genesys dryer’s performance was optimized using the AECS algorithm, based on measurement of the weight loss of the dried material. Equipped with a state-of-the-art control, Genesys is a "self-adaptive" system:
- it automatically, continually manages the quantity of air to be introduced into the production process;
- it allows reductions of 35% to 55% in electricity consumption, independently stabilises the air flow in the drying hopper and recovers energy for sieve regeneration, creating additional savings compared to the conventional systems currently used for PET processing.
Although precise, injection pressure monitoring is one-way and takes place on a feedback basis; in addition, the graph of this essential parameter shows significant variations.
Now, Piovan has successfully researched and developed an innovative system for minimising them: AIPC Technology. With AIPC, the IMM itself supplies the data necessary for process management, ensuring that the degree of drying is really suitable for the type of preform to be produced. With the aid of a signal transducer, the injection pressure is continually measured at the extruder and sent to the Genesys dryer. The dryer continually adapts its operation even more effectively in order to keep it within a working range suitable for the type of production, with variations not exceeding ± 2 bar throughout the cycle.
Read the complete article published on ComPETence.