KURUTMA & NEM ALMA

Up to 3,500 m³/h

• Material changeover in less than 2.5 hours thanks to the three-stage system
• Resin dehumidification in 5 hours thanks to high-exchange hoppers
• Energy savings thanks to high efficiency blowers

For flake processing up to 3000 kg/h

• Compact design, ideal for optimizing vertical space
• Versatility in handling granules, powders, crystals, and flakes
• Ideal for washing lines & pre-drying for extrusion

• Energy saving of up to 70%
• Constant Dew Point
• Minimal and simplified maintenance

Self-protection from VOCs substance

• Improved the desiccant capacity
• Low maintenance thanks to its high mechanical resistance
• Increased Self-protectionagainst VOCs

• Final product cost reduction
• Absolute process stability
• Energy efficient & less waste

• High filtration capacity with PureTech Technology
• Auto adaptive control to maximize condensation process
• Maximum energy efficiency, thanks to the integrated recovery system

• Pelet kalitesinin iyileştirilmesi
• Kontaminasyonların giderilmesi
• Zorlu uygulamalarda bile PCR kullanımını genişletin

• Compact design and plant versatility
• Reduction of heat loss and thermal stress of the resin
• Maximising production and reducing waste

150 ila 4.000 dm³

• Granüller, pullar ve öğütülmüş malzemeler için uygundur
• Sağlam ve güvenilir
• Malzemenin homojen çalkalanması

• Çok çeşitli geri dönüşüm PET işlenebilir
• Kirletici madde çıkarılması
• Uzun ömürlü üretim hattı maksimizasyonu

From 400 to 5,000 m³/h

• Final product costs reduction
• Ideal for producing with recycled plastic
• Absolute process stability

• Büyük oranda hurda azaltma oranı
• Geri dönüştürülmüş malzeme kullanımı nedeniyle değişkenliği sınırlar
• Tüm sürecin en yüksek enerji verimliliği

2,500 litre’ye kadar

• Enerji verimli çalışma: her malzeme için tüm kurutucu parametrelerini otomatik olarak düzenler
• Sürekli hava akış ayarı
• 16 adet’e kadar bağımsız silo yönetimi

• High-efficiency filtration
• Low maintenance
• Maximization of production line lifespan

From 250 to 3,500 m³/h

• Full auto-adaptive operation
• Automatic air-flow adjust and stabilization
• Regeneration heat recovery system

0,5 ile 25 kg/saat arasında

• Kompakt tasarım
• Dew Point values down to -40 °C
• Önceden tanımlanmış değerlere sahip 50 malzemenin programlanabilir veritabanı

20 ila 4.400 m³/h

• Doğru­ sıcaklık kontrolü
• Paslanmaz çelik hazneler
• Higroskopik olmayan malzemeler için optimum çözüm

From 50 to 150 m³/h

• Uzun ömürlü güvenilir makine
• Kullanımı kolay
• Çok çeşitli polimerler için uygundur

75 m'ye kadar³/h

• Kompakt ve verimli
• İşleme makinesine veya mobil bir arabaya kurulabilir
• Düşük üretim akışlarına sahip uygulamalar için ekonomik çözüm

From 50 to 450 m³/h

• Minimum tüketim ve sabit çiy noktası
• Minimum ayak izi ile kompakt tasarım
• Sıfır toz emisyonu

400 ila 2.900 m³/h

• For ambient temperature up to 45°C and humidity up to 85%
• Kolay bakım
• Asma kat veya zeminde birincil makineye yakın kurulum için kompakt ayak izi

2,500 litre’ye kadar

• Efficient thanks to the effective thermal insulation
• Easy accessible
• Optimum drying thanks to proper heat distribution and material flow

From 3,000 to 13,500 l

• Optimum heat distribution and material flow
• Efficient thanks to the effective thermal insulation
• Residence control thanks to load cells or level sensor

Up to 16,000 l

• To ease flakes drying with proper geometries
• Optimum heat distribution and material flow
• Efficient thanks to the effective thermal insulation

2,500 litre’ye kadar

• Efficient thanks to the effective thermal insulation
• Easy accessible
• Independent set point for each single hopper

Up to 2,000 l

• Compact solution for low ceiling installation sites
• Easy to use by means of dedicated HMI or integration with dryers, inspection window and level sensors
• Thermally insulated for energetic optimisation

From 1,000 to 6,000 m³/h

• Ideal for processing dusty material
• Cyclonic technology
• Easily maintenance

Up to 240 kW

• The right solution where natural gas is more cost effective than electricity
• Fine temperature control
• Suitable for different type of gasses

650 ila 1.400 m³/h

• Uzun ömürlü güvenilir makine
• Kullanımı kolay
• Çok çeşitli polimerler için uygundur

200 ila 450 m³/h

• Uzun ömürlü güvenilir makine
• Kullanımı kolay
• Çok çeşitli polimerler için uygundur

For amorphous PET or PLA, virgin or regrind

• Energy efficient - closed loop design
• Solid cone - no perforated metal
• Particle separation system before take-off

Retro-fit conversions for process air dryers

• Exclusive non-ceramic burner
• Constructed of corrosion resistant stainless steel
• Digital temperature control

• Homogeneous thermal conditioning and lowest residual moisture
• Auto-adaptability
• Broad range of configurations

• Large capacity cartridge filter
• FOCUS touch screen control with onboard datalogging
• Throughputs from 20-200PPH depending on resin type

Everything you need to know at your fingertips

• Real-time, on-screen graphing of all key datapoints allows easy check of operational parameters
• Control regeneration by dewpoint or time settings
• Seven-day clock allows automatic operation on either a one-time or repetitive basis

• Energy efficient - Gas or electric operation
• -40 Dewpoint standard
• 300CFM to 10,000 CFM available

• Suitable for drying non-hygroscopic plastic materials
• Continuous hot air-stream
• Available in gas or electric

• Average dewpoint to -100ºF with flatline temperature profiles
• Automatically adjusting
• Energy savings with heat recovery

Engineered for medical or high tech clean room applications

• 5,10, or 15LB insulated, self draining drying hopper
• Air filtration to .01 microns
• -40ºF dewpoint instant dry air

• Energy efficient, closed loop drying
• Gas or electric process & regeneration heaters
• Extremely stable dewpoint up to -100ºF

Advanced rotary wheel, molecular sieve technology

• Uses AMS technology
• Steady state constant low dewpoint
• Temperature range from 110ºF- 350ºF

Handles hard to flow materials

• Slide gate material shut-off
• Easy to clean and maintain
• Cone to lid insulation

Cone to lid insulated and energy efficient

• Stainless steel construction, inside and out
• Large exterior and interior access doors
• Quick material change

Solid cone promotes better air distribution

• Insulated throat to lid
• Insulated side walls and access door
• Machine, mezzanine or stand mounted

• Final product cost reduction
• Auto adaptive operation for an absolute process stability
• Suitable for a wide range of polymers, including recycled materials

From 50 to 100 m3/h

• Minimum tüketim ve sabit çiy noktası
• Minimum ayak izi ile kompakt tasarım
• Sıfır toz emisyonu